Added details for DTC diagnostics, where you can view the date and time of the error occurrence, mileage, and other useful information provided by the control unit.
A force-reset mode for the ECU has been added to the DTC clearing functionality. Sometimes DTC cannot be cleared during the current operating cycle, so the module is rebooted, and the error is cleared again automatically. Exceptions: SRS, VCM, VGM, IHU, and CSD modules for iCUP vehicles, which are not rebooted automatically. DTC must be cleared with the engine turned off in Inactive / Convenience / Active modes. In Driving mode, automatic module reboot does not occur, and some DTC may not be cleared.
Active grille shutters adaptation has been added.
Data Identifiers (DID) have been added for the ASDM module.
Improved the headlamp module configuration dialog (HCML/HCMR), new boot loaders added.
Added a restriction to prevent the unlocking of the parking heater if it is not locked.
The list of electronic modules in the diagnostics section is now displayed in alphabetical order.